kenton
 …the MIDI specialists
MIDI solutions you can trust
 
Comodo Trusted Site Seal

Find us on Facebook & YouTube

Kenton on Facebook  Kenton Videos on YouTube
"...My recent purchase of your modular solo has brought me nothing but joy and greatly improved my eurorack- computer communications. Solid clock as well.!"

"... Kenton Midi USB Host to the rescue ... Works a treat, straight out of the box, arrived the next day. What more can I say?"

More Testimonials

Kenton support for the Korg Monopoly

There are basically two options available for this model..

   
  With an internal MIDI retrofit (polyphonic)
  With a CV converter (monophonic)
   

Internal MIDI retrofit
 

Click here for information about this retrofit
http://www.kentonuk.com/kenton/retrofit_inh/kgmp-inh.html

Click here to buy the retrofit including fitting by Kenton
http://www.kentonuk.com/products/items/sockets/korg/monopoly.shtml

Click here to buy the retrofit kit only
http://www.kentonuk.com/products/items/sockets/korg/monopoly.shtml

With a CV converter
 

You need either a Pro-Solo or a Pro-2000

You will need leads - this model has all 1/4" jacks so you will need 3.5mm jack to 1/4" jack leads
You will need at least 2 of these leads (for CV & Gate)
Plus optionally you may want leads for
Filter Cutoff control
Portamento control
clocking the arpeggiator

Connect as follows

  Input on synth   Skt type       Converter output   Notes  
  CV In   1/4" jack   to   CV Chan A      
  Trig In   1/4" jack   to   Gate   (Set trig polarity of Monopoly to +15v)  
  VCF fcM In   1/4" jack   to   Aux   (Adjust Aux max to give +5v)  
  Porta   1/4" jack   to   Aux   (Adjust Aux max to give +5v)  
  Arpeggio Trig In   1/4" jack   to  

Clk

   (Needs 'inverted clock' setting as clocks on 'falling edge')  
                     

Click here for information about and to buy the Pro-Solo mkII

Click here for information about and to buy the Pro-2000 mkII

Click here for 3.5mm jack to 1/4" lead
   
Cookie Policy Page top View Basket Home